Panasonic PV-HS2000 operating instructions Satellite Receiver

Connecting a Satellite Receiver to the Hard Disk Recorder (Using S-Video)

1. Connect the incoming television signal to the IN jack on your satellite receiver.

2. Connect the red and white Audio plugs of an A/V cable from the AUDIO OUT jacks on your satellite receiver to the LINE 2 INPUT jacks on the Hard Disk Recorder, matching like colors.

3. Connect an S-Video cable from the S-VIDEO OUT jack on your satellite receiver to the S-VIDEO IN jack on the Hard Disk Recorder.

4. Connect the red and white Audio plugs of an A/V cable from the LINE 2 OUTPUT jacks on the Hard Disk Recorder to the AUDIO IN jacks on your television, matching like colors.

6. Connect an S-Video cable from the S-VIDEO OUT jack on the Hard Disk Recorder to the S-VIDEO IN jack on your television.

7. Attach the satellite receiver controller. See “Satellite Receiver and Cable Box Controllers” on page 10.

8. Follow the C ~ E instructions on page 9 for telephone connection, AC power connection, and setup.

NOTES

•Leave the yellow video cable unattached on your satellite receiver, the Hard Disk Recorder and television.

•Refer to your TV or satellite receiver owner’s manual for more information on connecting to these components.

Connecting a Satellite Receiver and A/V Receiver to the Hard Disk Recorder (Using S-Video)

1. Connect the incoming television signal to the IN jack on your satellite receiver.

2. Connect an A/V cable from the AUDIO OUT jacks on your satellite receiver to the LINE 2 INPUT jacks on the Hard Disk Recorder, matching like colors.

3. Connect an S-Video cable from the S-VIDEO OUT jack on your satellite receiver to the S-VIDEO IN jack on the Hard Disk Recorder.

4. Connect the Audio cable from the AUDIO OUT jacks on your A/V receiver to the speakers. Then, connect the S-Video cable from MONITOR OUT jack on your A/V receiver to the S-VIDEO IN jack on your television. (Note: If you do not have separate speakers, see step 4 on page 12.)

5. Connect an S-Video cable from the S-VIDEO OUT jack on the Hard Disk Recorder to the S-VIDEO IN jack on your A/V receiver.

6. Connect an A/V cable from the AUDIO OUT jacks on the Hard Disk Recorder to the IN jacks on your A/V receiver, matching like colors.

7. Attach the satellite receiver controller. See “Satellite Receiver and Cable Box Controllers” on page 10.

8. Follow the C ~ E instructions on page 9 for telephone connection, AC power connection, and setup.

NOTE

•Refer to your TV, satellite receiver, or A/V receiver owner’s manual for more information on connecting to these components.

TV

VHF/UHF

R AUDIO L VIDEO S-VIDEO

IN

IN

Satellite Receiver

IN	R AUDIO L VIDEO		VHF/UHF IN
SERIAL		S-VIDEO	VHF/UHF OUT

					OR
				Hard Disk Recorder
	INPUT		OUTPUT
	R AUDIO L	VIDEO	R AUDIO L VIDEO		AC-IN
ANT/CATV 1
IN		S-VIDEO	S-VIDEO	IR SERIAL	TEL LINE
	LINE	IN	OUT	BLASTER CONTROL
	2			PORT

TV

Satellite Receiver

OR

A/V Receiver

Hard Disk Recorder

13