Panasonic PV-HS2000 Before Using, Installing the Batteries, Watching the Welcome Video

Before Using

Installing the Batteries

The Hard Disk Recorder remote control requires two (2) new AA alkaline batteries.

1.On the back of the Hard Disk Recorder remote, pull back on the tab and lift the battery cover off.

3. Press the battery cover back into place.

2. Match the + and - marks on the batteries to the + and - marks in the battery case, then insert the batteries.

AAAA

4.Test the unit by pressing POWER. If the batteries are inserted correctly, the red light will blink.

NOTE: Removing the batteries will not require you to re-program your remote control.

Watching the Welcome Video

Make sure you have completed all the connections. (See pages 8~17.)

An instructional video is waiting for you to play directly from the Hard Disk

Recorder’s Replay Guide. To watch the video:

1.Once you complete the on-screen setup, press REPLAY GUIDE on the remote.

2.Using the arrow buttons on the remote,

highlight the video titled “Welcome to Panasonic SHOWSTOPPER.” 3.Press PLAY on the remote.

You may use all of the Hard Disk Recorder’s television control features, such as pause and rewind, while watching this video. All of the features

covered in the instructional video are also referenced in this guide.

After you watch the video and are comfortable with the Hard Disk Recorder’s features, you may want to save the video onto a videotape and delete the video from the Replay Guide. This will make more room for recording shows. See “Saving Shows to Videotape” on page 39 for instructions on connecting the Hard Disk Recorder to a VCR.

Hard Disk Recorder Feature Updates

Occasionally, new features are added to the Hard Disk Recorder. These features are updated directly over the telephone line you connect to the Hard Disk Recorder. As features change, you may encounter features that perform differently from those in this guide. In general, follow the on-screen instructions if a feature is not documented in this guide.

6