JVC HR-J458E Clock Set, Access Initial SET Screen, Access Clock SET Screen, SET Date and Time

42ENSUBSIDIARYSETTINGS(cont.)

Clock Set

Turn on the TV and select the VIDEO channel (or AV mode).

1 2 3

2

4 5 6

7 8 9

0 4

1 ?

OK

MENU

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set "ON" or "OFF" at the Clock Set screen (the default setting is "OFF"). Press OK until the Just Clock setting begins blinking, then press %Þto change the setting.

IMPORTANT: If you turn off Just Clock, the accuracy of your recorder's built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to "OFF".

IMPORTANT

If you performed Auto Set Up (☞ pg. 4) or Auto Channel Set (☞ pg. 34), without ever having set the clock previ- ously, the recorder's built-in clock is also set automatically. Perform the following steps only if —

—Auto Clock Set has not been performed correctly by Auto Set Up or Auto Channel Set.

or

—the recorder's memory backup has expired.

or

—you want to change Just Clock setting (☞ "Just Clock" in the left column).

1		TURN THE RECORDER ON
	Press		.
		ACCESS MAIN MENU
2		SCREEN
	Press MENU.
		ACCESS INITIAL SET
3		SCREEN
	Place the pointer next to "INITIAL SET" by pressing %Þ,
		then press OK or%.
		ACCESS CLOCK SET
4		SCREEN
	Place the pointer next to "CLOCK SET" by pressing %Þ,
	then press OK or%. The Clock Set screen appears.
			INITIAL SET		CLOCK SET
		CLOCK SET		TIME	DATE	YEAR
		GUIDE PROG SET		0: 00	01 . 01	98
				JUST	CLOCK : OFF
				TV PR.	:	1
	[5°] =			[5°] =
		[MENU] : EXIT		[MENU] : EXIT
5		SET DATE AND TIME
	Press %Þ to set the time, then press OK or%. The
		"date" display begins blinking. Repeat the same
		procedure to set the date and year.
		● When you set the time, press and hold %Þto
		change the time by 30 minutes.
		● When you set the date, press and hold %Þto
		change the date by 15 days.
6		SET JUST CLOCK
	The default setting is “OFF”. Set as desired by pressing
		%Þ, then press OK or%.
		● For the Just clock function, ☞ "Just Clock" in the left
		column.
		● If you set to “OFF”, you can disregard the next step as
		you won’t be able to receive regular clock adjustments.