EN 5
SELECT AREA
3
Press OK. The Channel Preset Order display appears on
the front display panel and/or on the screen.
If you are referring to the front display panel
Press %fi to select your area code.
For SUISSE For BELGIUM
DEUTSCHSPR.RAUM : 01 REGION FRANÇAISE :01
REGION FRANÇAISE : 02 NEDERLANDS :02
REGIONE ITALIANA : 03 DEUTSCHSPR.RAUM : 03

If you are referring to the on-screen display

Press %fi to place the pointer next to your area's name.
●The stations broadcasting in the language that is used
in your area will be stored in the lower channel
position numbers.
SELECT O.S.D. LANGUAGE
4
Press OK. The On-screen Display Language Set display
appears on the front display panel and/or on the screen.
If you are referring to the front display panel
Press %fi to select your language code.
FRANÇAIS: 03 DEUTSCH: 02 ENGLISH: 01

If you are referring to

the on-screen display

Press %fi to place the
pointer next to the
language of your choice.
(Ex.) DEUTSCH is selected for DEUTSCHLAND
International telephone
country code Language code
NOTES:
●

If you are using the on-

screen display, the AUTO

SET screen will appear after

pressing OK in step 5. As

Auto Set Up progresses, the

" " mark on the screen

moves from left to right.

●

If there is a power cut, or if

you press or MENU

while Auto Set Up is in

progress, Auto Set Up will

be interrupted; be sure to

turn off the recorder power once and try again from step 1.

AUTO SET
PLEASE WAIT
[MENU] : EXIT
0
+++
Beginning End
(Ex.) DEUTSCHSPR.RAUM is selected for SUISSE
For SUISSE For BELGIUM
CH PRESET ORDER
REGIONE ITALIANA
REGION FRANÇAISE
DEUTSCHSPR. RAUM
[5∞] =
[MENU] : EXIT
CH PRESET ORDER
DEUTSCHSPR. RAUM
NEDERLANDS
REGION FRANÇAISE
[5∞] =
[MENU] : EXIT
(Ex.) DEUTSCH is selected for SUISSE
International telephone
country code Language code
O.S.D. LANGUAGE
FRANÇAIS
DEUTSCH
ENGLISH
[5∞] =
[MENU] : EXIT
Area code
PERFORM AUTO SET UP
5
Press OK.
"Auto" appears on the display panel and blinks; do
NOT press any button on the recorder or remote
control until the display panel shows the current time
or "(PR) 1" or "– –:– –". (Refer to box on page 6.)
●Auto channel set function takes place first; it assigns
automatically all receivable stations in your area.
●Auto clock set function sets the clock automatically
by reading the clock setting data from a station
transmitting a PDC signal while auto channel set is
being performed.
●During auto channel set, the recorder recognizes each
station name of the detected stations and stores them
in the recorder's memory, then automatically sets
SHOWVIEW assigned Guide Program number for those
stations according to the broadcast area.
NOTE:

In the area where no TV station transmits a PDC signal,

the recorder can perform neither auto clock set nor

auto Guide Program number set.

CONTINUED ON NEXT PAGE.