Extron electronic USP 405 Labeling Buttons on the USP, Using the help program, Using the software

3. Click the I/O Config button to configure the inputs from the I/O Configuration Window, shown below.

Using the help program

For information on program features, press the F1 computer key, or click on the Help menu from within the USPDDS Control Program, or

double-click on the USPDDS Help icon in the Extron Electronics group or folder.

For explanations of buttons or functions, click the tabs in the help screen to reach the desired screen. Use a mouse or the Tab and Enter keys to select a button/ function. A description and tips on using the program appear on screen.

Labeling Buttons on the USP 405

You may wish to customize the labeling of the USP 405’s front panel buttons. Premade templates and blank templates for the USP 405’s button label windows are included in appendix A of this manual. However, you can easily create, customize, and print labels for the USP’s button label windows by using the Button-Label Generator software.

Button-Label Generator software

The Extron Button-Label Generator program (Buttons.exe) is included with the USP 405, and it can also be downloaded from the Extron Web site (http://www.extron.com). This program is used to create and print labels that can be inserted into the illuminated pushbuttons or placed in slots above/below buttons on various Extron switchers.

Installing the software

By default, the installation program installs the button label software program in the C:\USPDDS directory, and places the Button-Label Generator icon in the “Extron Electronics” group or folder.

Using the software

1.To run the Button-Label Generator program, double-click on the Button- Label Generator icon (shown at left) in the Extron Electronics group or folder, and click OK when prompted.

USP 405 • Serial Communication 3-9