Extron electronic USP 405 Serial Communication, Computer, LCD Projector, Video Camera, Laptop

Setting the Output Rate Using the Per Input Feature

Using the Per Input feature, each input (1 through 5) can have a different output rate associated with it. This feature must be initially configured through the USP 405’s Control Program for Windows. The initial configuration is stored in memory, and can be recalled whenever the output resolution is set to Per Input via either RS-232, the Control Program, or the USP’s front panel controls.

As an example, the Per Input feature can be used in applications where the

USP 405 is being used in conjunction with a matrix switcher that has a variety of inputs and outputs. See the example below. This feature allows the USP to automatically upscale/trans-scale/scan convert the input signal, without additional programming.

Only one process (scaling, trans-scaling, or scan conversion) can occur at one time. For example, you cannot scale and scan convert an input at the same time.

				Computer
			RGBHV
S-video				RGBHV
				Extron's
VCR				RGB 109xi	LCD Projector
				S-video
S-video					Video Camera
DVD Player
RGBHV
				S-video
Laptop					Videoconferencing
S-video				RGBHV
		Extron's Crosspoint 1616
RGBHV				Matrix Switcher
				S-video
1	2	3	4	5
				USP 405
				Extron's USP 405

USP 405 • Serial Communication 3-11