Extron electronic manual Image Adjustments, Exit menu, USP 405 Installation and Operation

Advanced

Configuration

MENU

Genlock

NEXT	Horz Phase	Sub	NEXT
	128	016
	Horizontal phase	Subcarrier phase
	• 0 thru 255	• 0 thru 255

Exit menu

From this menu, press the Next button to return to the Default menu cycle, or press the Menu button to return to the Input Configuration menu.

Default

Cycle

NEXT

Genlock

MENU

Exit

MENU

Input

Configuration

Image Adjustments

Picture adjustments apply to scaled video output only; RGB signals are passed through without adjustments.

Color, tint, brightness, contrast, detail, sizing, zoom, centering

To adjust an image for centering, sizing, brightness, contrast, color, tint, zoom, or detail, follow the steps below. The illustration below shows the process of making of color adjustments to the image. The other picture adjustments follow a similar procedure.

1.Press the input selection button of the input you wish to adjust.

2.Press the appropriate picture adjustment button for centering (Center), sizing (Size), brightness/contrast (Brt/Cont), color/tint (Col/Tnt), zoom, or detail. The LCD display shows the name of the adjustment and the value of the current setting.

3.Rotate the horizontal Adjust knob () or vertical Adjust knob () to select a level from the following adjustment ranges:

Power

on

Default

60-369-0x

Extron

2 sec.

2 sec.

Cycle

Version x.xx

USP 405

NOTE

With an input signal present, the following picture

adjustment(s) are "Not Available" for the

respective inputs with exceptions in ():

Select an Input button

Input

Input 1: color and tint (not available anytime)

selection

button

Input 2: tint (but available only if S-video or composite is

selected and NTSC signal is input)

Input #3

Input 3: tint (but available only if an NTSC signal is input)

Composite

Input 4: tint (but available only if an NTSC signal is input)

Select a Picture Adjustment button

Input 5: color, tint, and detail

COL/TNT

If the Test Pattern submenu in the Advanced Configuration

NOTE

menu has been set to any pattern other than "Off", "Crop", or

Color

Tint

a "Film aspect" crop pattern, the picture control adjustments

101

114

will be disabled ("Not Available").

The horizontal Adjust knob and the vertical Adjust knob

NOTE

are used to adjust the image settings on the left and

10 sec.

right sides of the LCD screen, respectively.

timeout

USP 405 • Installation and Operation 2-19