Installing Satellite Controller, Make connections | JVC HR-470

SAT CONTROL SET

EN 13

Satellite Receiver Control Setting

Satellite receiver

	Your recorder	Satellite Controller
		Satellite Controller
		(not provided)
		(suggested locations)
	Transmitter	Satellite Controller
	Transmitter	(not provided)
		(not provided)
	Satellite receiver

21-pin SCART cable (not provided)

SAT CONTROL

AV2 (L-2) IN/DECODER

The following procedure is required if you receive satellite channels through a satellite receiver. Approximately 20 seconds before the SHOWVIEW timer programming ( pg. 24) or Express timer programming ( pg. 26) starts, the recorder sets its input mode to “L-2” and automatically switches the satellite receiver’s channels using an optional Satellite Controller.

Installing Satellite Controller

A Situate the Satellite Controller.

Place the Satellite Controller so that the path between its transmitter and the satellite receiver’s remote sensor is unobstructed.

B Attach the Satellite Controller.

Fix securely using the adhesive strip attached on the back of the Satellite Controller.

C Make connections.

Be sure to connect the recorder’s AV2 (L-2) IN/DECODER connector to the satellite receiver’s 21-pin SCART connector.

NOTE:

When connecting your satellite receiver, refer to its instruction manual.

D Connect the Satellite Controller to recorder.

Connect the Satellite Controller to the SAT CONTROL connector on the rear panel.

Back of recorder

Image 13

JVC HR-470, HR-J670 Installing Satellite Controller, Situate the Satellite Controller, Attach the Satellite Controller

Contents

Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel Operating JVC TVs How To Use Situate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mains Turn on the recorder Auto Set UpSelect your country Select the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e 10 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or e Just Clock Language for the on-screen display Access the Country Set screen Access the Main Menu screenLanguage 12 EN Situate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections 14 EN Setting satellite receivers brand and channel NexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 16 EN Basic Playback High-Speed Search Slow MotionVariable Speed Search Pause during playback Manual Tracking 18 ENInstant ReView Skip Search Index SearchNext Function Memory Repeat Playback 20 EN Engage the ITR mode Instant Timer Recording ITRWatching Another Set the recording duration 22 EN Reset the counterTape Remaining Time Set the counter display Recording Playback Access the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 24 EN Engage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set 26 EN Express Timer Programming VPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR + 28 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screen Engage the Auto Satellite Programme Recording mode Select the L-2 Select modeProgramme Recording 30 EN Set the edit mode Set the recorder’s input modeEdit From a Camcorder Start the camcorder Another Video Recorder Set the input mode of recording deck32 EN Start the source player Satellite receiver Decoder Back of recorder Connecting To a Satellite Receiver 34 EN Select the input modeConnect the decoder Set the tuner Make connections HR-J670/671/672/673/674EU only Access the Mode Set screen Mode SetSelect the mode Select the mode setting This feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is For Example 38 EN About Ntsc Playback Tuner Set Access the Auto Channel Set screen40 EN Auto Channel Set View the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 42 EN Delete a Channel When Receiving a Scrambled Broadcast Set Stations a 44 ENSet Stations B Station Name TV Station And ID List Exit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 46 EN Guide Program Number Set Showview SetupGuide Program Number Enter the Guide Program number Clock Set Access the Clock Set screen48 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation 50 EN Troubleshooting Recording 52 EN Other Problems Playback 54 EN Connecting To a Satellite Receiver Delete a Channel Auto Set UpLanguage Manual Channel Set Manual Tracking Mode Set Timer warning display Tuner Set Country Code International Telephone Language CodeSee Instructions pg