Basic Playback, 16 EN | JVC HR-J670, HR-671, HR-674, HR-272EU, HR-673

16 EN

PLAYBACK

Basic Playback

Turn on the TV and select the video channel (or AV mode).

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.

●Don’t apply too much pressure when inserting.

●The recorder’s power comes on automatically and the counter is reset to 0:00:00.

●If the record safety tab has been removed, playback begins automatically.

B Find the programme start point.

If the tape is advanced past the start point, press 3. To go forward, press 5.

C Start playback.

Press 4. “BEST” appears blinking in the recorder’s front display panel during automatic tracking. ( pg. 23)

D Stop playback.

Press 8 on the remote control or 0 on the recorder’s front panel. Then press 0 to remove the cassette.

Clean the video heads using a dry cleaning cassette — TCL-2UX — when:

●Rough, poor picture appears while a tape is played back.

●The picture is unclear or no picture appears.

●“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON” ( pg. 37)).

Usable cassettes

●Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full- sized VHS cassette.

●This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back a recorded Super VHS tape.

Image 16

JVC HR-J670, HR-671, HR-674, HR-272EU, HR-673, HR-470, HR-672, HR-472EU instruction manual Basic Playback, 16 EN

Contents

Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel How To Use Operating JVC TVs Check the contents Situate the recorderConnect the recorder to TV Connect the recorder to mains Turn on the recorder Auto Set UpSelect your country Perform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or e Perform Preset Download 10 ENSet the video channel Press rt to select CH - and press OK or e Language for the on-screen display Just Clock Access the Main Menu screen Access the Country Set screenLanguage 12 EN Installing Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connections Setting satellite receivers brand and channel 14 EN NexTView Link TV Auto Power OnVCR Auto Standby Direct Rec Basic Playback 16 EN Slow Motion High-Speed SearchVariable Speed Search Pause during playback Manual Tracking 18 ENInstant ReView Index Search Skip SearchNext Function Memory Repeat Playback 20 EN Instant Timer Recording ITR Engage the ITR modeWatching Another Set the recording duration Reset the counter 22 ENTape Remaining Time Set the counter display Playback Recording Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 24 EN Set the VPS/PDC mode Engage the recorder’s timer modeSatellite Receiver Users Guide Program Number Set Express Timer Programming 26 EN To Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR + 28 EN Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screen Select the L-2 Select mode Engage the Auto Satellite Programme Recording modeProgramme Recording 30 EN Set the recorder’s input mode Set the edit modeEdit From a Camcorder Start the camcorder Set the input mode of recording deck Another Video Recorder32 EN Start the source player Connecting To a Satellite Receiver Satellite receiver Decoder Back of recorder Select the input mode 34 ENConnect the decoder Set the tuner HR-J670/671/672/673/674EU only Make connections Mode Set Access the Mode Set screenSelect the mode Select the mode setting You can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is 38 EN For Example About Ntsc Playback Access the Auto Channel Set screen Tuner Set40 EN Auto Channel Set View the Confirmation screen Perform Auto Channel SetPress OK twice 42 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations a 44 ENSet Stations B TV Station And ID List Station Name Access the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 46 EN Showview Setup Guide Program Number SetGuide Program Number Enter the Guide Program number Clock Set Access the Clock Set screen48 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operation Troubleshooting 50 EN Recording Other Problems 52 EN Playback 54 EN Auto Set Up Connecting To a Satellite Receiver Delete a ChannelLanguage Manual Channel Set Manual Tracking Mode Set Timer warning display Tuner Set Country Code International Telephone Language CodeSee Instructions pg