Filename [HRJ670EU2.fm]
Masterpage:Left
28 EN TIMER RECORDING (cont.)

Check, cancel and change programmes

ADisengage the timer mode.
Press # (TIMER), then press 1.
BAccess the Programme Check screen/display.
CAccess the Programme screen/display.
The front display panel shows the programme start time. Pressing
OK changes the display to the programme stop time, then the
date and the channel position.

To cancel or change a programme...

DCancel or change a programme.
Press & to cancel a programme. To change programme
settings, press the appropriate button: START+/–,
STOP+/–, DATE+/– , PR+/–, VPS/PDC and/or SP/LP
(p).
You can change “TV PROG” to “SAT” for the channel position
by pressing the NUMBER key “0”.
EReturn to the normal screen/display.
Press " as many times as necessary. If there are still
some programmes remaining, go on to step 6.
FReturn to the timer mode.
Press # (TIMER).
NOTE:
You can also check the programmes on the front display panel
even if the recorder’s power is off (unless the recorder is in the
Power Save mode pg.38) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
Press ".
Press " again to check
more information. Each time
you press ", the next
programme’s information
appears.
HRJ670EU2.fm Page 28 Thursday, December 9, 1999 3:50 PM