Filename [HRJ670EU3.fm]
Masterpage:Right
EN 49
ESet the date and time.
Press rt to set the time, then press OK or e. The “date”
display begins blinking. Repeat the same procedure to set
the date and year.
●When you set the time, press and hold rt to change the time
by 30 minutes.
●When you set the date, press and hold rt to change the date
by 15 days.
FSet Just Clock.
The default setting is “OFF”. Set as desired by pressing
rt, then press OK or e.
●For the Just clock function, 墌“Just Clock” on page48.
●If you set to “OFF”, you can disregard the next step as you
won’t be able to receive regular clock adjustments.
GSet the source channel position for clock
data.
The recorder is preset to receive clock setting and
adjustment data from channel position 1.
Press rt to set the channel position to the number
representing the station transmitting clock setting data,
then press OK or e.
HStart the clock operation.
Press MENU.
NOTES:
●Just Clock (when set to “ON”) adjusts the recorder’s built-in
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
●Just Clock is not effective when ...
... the recorder’s power is on.
... the recorder is in the Timer mode.
... a difference of more than 3 minutes exists between the
built-in clock’s time and the actual time.
... the recorder is in the Auto Satellite Programme Recording
mode (墌pg. 30).
... the recorder is in the Power Save mode (墌pg.38).
... ”L-2 SELECT” is set to “SAT” (墌pg.39).
●If Just Clock is set to “ON”, the recorder’s clock is
automatically adjusted at the start/end of Summer Time.
●Just Clock may not function properly depending on the
reception condition.
HRJ670EU3.fm Page 49 Thursday, December 9, 1999 3:51 PM