basic features
27
When Programmes Overlap Each Other
If PROGRAM OVERLAPPED appears, you have another programme overlapping the programme you have just made.
confirm overlapping programmes The Program Check screen appears and conflicting programmes will start blinking.
Example: Programme 1 (you have just made) and Programme 4 overlap each other.
select programme to modify Press the A and Bbuttons, then press OK (or E). You can only select one of the overlapping programmes.
note If you do not mind this overlap, press PROG to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. Without doing anything for about 1 minutes, the VCR will finish the timer programming.
cancel a programme Press xto cancel a programme when the Program screen you do not want is shown.
|
| START | STOP | CH | DATE | |
| 1 | 8:00 | 10:00 | 3 | 24.12 |
|
| 2 | 10:00 | 10:45 | 2 | 25.12 |
|
3 | 11:30 | 13:00 | 1 | 25.12 |
| |
4 | 9:00 | 10:00 | 92 | DAILY | ||
5 |
|
|
|
|
| |
6 |
|
|
|
|
| |
7 |
|
|
|
|
| |
8 |
|
|
|
|
| |
| [1] ak |
|
|
|
| |
| [PROG]: EXIT |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| – P1 – | ||
START | STOP | ||
8:00 |
| 10:00 |
|
SP | VPS/PDC OFF | ||
DATE | TV PROG | ||
24.123 ITV
| [x]: DELETE |
| |
| [PROG]: EXIT |
|
|
|
|
|
|
|
|
|
|
change a programme Use the START +/Ð,
STOP +/Ð, DATE +/Ð, PR +/Ð, /and PDC buttons as necessary, then press OK.
PROGRAM COMPLETED appears on the screen for about 5Êseconds, then normal screen appears.
note If the overlap is not yet solved or another overlap occurs with the timer programme setting made last after making correction on a programme, the conflicting programmes will be shown on the Program Check screen again. Repeat the above steps again until the overlap is solved.
