JVC HR-J682EK, HR-J680EK Satellite Receiver Control Settings, Installing Satellite Controller

36

advanced features

Satellite Receiver

Control Settings

The following procedure is required if you receive satellite channels through a satellite receiver. Around 20 seconds before the VIDEO Plus+ timer record- ing or Manual timer recording starts, the VCR sets its input mode to L-2 and automatically switches the satellite receiverÕs channels using the provided Satellite Controller.

Installing Satellite Controller

situate satellite controller Place the Satellite Controller so that the path between its transmitter and the satellite receiverÕs remote sensor is unobstructed.

attach satellite controller Fix securely using the adhesive strip at- tached on the back of the Satellite Controller.

connect up Be sure to connect the recorderÕs AV2 (L-2) IN/DECODER connector to the satellite receiverÕs 21- pin SCART connector.

note When connecting your satellite receiver, refer to its instruction manual.

Satellite Receiver

Your VCR	Satellite Controller
	(suggested locations)
Transmitter	Satellite Controller
Satellite Receiver

DECODER VCR TV

connect satellite controller to vcr Connect the Satellite Controller to the SAT CONTROL connector on the rear panel.

Your VCR