JVC HR-J682EK, HR-J680EK Editing Using Another VCR, Set edit mode See Picture Control on pageÊ30

42

advanced features

Editing Using Another VCR

connect up Connect the two VCRs together using a 21-pin SCART cable. If this VCR is to be the player, connect its AV1 (L-1) IN/OUT connecter to the recording VCR. If this VCR is to be the recorder, you can use either the AV1 (L-1) IN/OUT or the AV2 (L-2) IN/DECODER connecter to connect to the player VCR.

set recorder input mode The recording VCR mode must be set to AUX. If this VCR is the recorder, press AUX and /or PR to select L-1(if youÕve used the AV1 (L-1) IN/OUT connecter) or L-2(if youÕve used the AV2 (L-2) IN/DECODER connecter). If this VCR is the player, set O.S.D. to OFF. (☞ pg.Ê44)

¥When using the AV2 (L-2) IN/DECODER connector, set L-2 SELECT to the appropriate mode. (☞ pg.Ê41)

set edit mode See Picture Control on pageÊ30.

start source vcr Engage its PLAY mode.

start recording vcr Engage its RECORD mode.

TV Set Your VCR

Video Channel or AV Mode

21-pin SCART Cables

(not provided)

RF Cable

(provided)

	Another VCR	Your VCR as the Player
Your VCR as the Recorder	Your VCR	TV Set

RF Cable	Video Channel
	or AV Mode
(provided)
21-pin SCART Cables
(not provided)

Another VCR