JVC HR-J747MS Adjust Tracking Manually, Return to Automatic Tracking, Activate Repeat Playback

12ENPLAYBACK (cont.)

Manual Tracking

1	2	3	REVIEW
4	5	6
7	8	9	C. RESET
	0	4 SP/LP/EP
2
			TV PROG
1	3	Á	FF
REW	7	8
¦			PAUSE
1	4	¢
3		STOP	PUSH JOG
C.MEMORY

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons.

OVERRIDE AUTOMATIC TRACKING

1 Press (SP/LP/EP) on the remote to engage manual tracking.

ADJUST TRACKING

MANUALLY

2 Press TV PROG + or – to adjust tracking.

RETURN TO AUTOMATIC TRACKING

3 Press SP/LP/EP () on the remote to re-engage automatic tracking.

Repeat Playback

Your video recorder can automatically play back the whole tape 20 times repeatedly.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Wide Quality

Use this function to improve image contrast which tends to degrade especially with wide-screen TVs.

1		START PLAYBACK	1
		Press PLAY.
		ACTIVATE REPEAT
2		PLAYBACK
		Press PLAY and hold for over 5 seconds, then release.
		● The Play indicator ($) on the display panel blinks
		slowly.
	● The tape plays 20 times automatically, and then
		stops.
3		STOP PLAYBACK
		Press STOP at any time to stop playback.

NOTE:

ACTIVATE WIDE QUALITY

During playback, press WIDE QUALITY on the recorder.

●The button will light up.

●Pressing the button again turns off the light.

●Turn on/off the light according to the type of playback picture you want.

●The setting will remain effective even though you turn on/off the recorder.

●This function is also effective with large-screen 4:3 aspect ratio TVs as well.

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.