Masterpage:Left
32 EN EDITING
Edit From A Camcorder
You can use a camcorder as the source player and your
recorder as the recorder.
AMake connections.
Connect the camcorder’s AUDIO/VIDEO OUT
connectors to the recorder’s front panel AUDIO/VIDEO
input connectors.
●When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
●When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the recorder. Refer to
the camcorder’s instruction manual for operating procedure.
BSet the recorder’s input mode.
Press AUX (NUMBER key “0”) and/or PR to select “F-1”.
CSet the edit mode.
See “PICTURE CONTROL” on page 41.
DStart the camcorder.
Engage the Play mode of the camcorder.
EStart the recorder.
Engage the Record mode of the recorder.
NOTES:
●All necessary cables can be obtained from your dealer.
●When you select “EDIT” to dub tapes in step 3, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
Your recorder
Audio/Video cable
(not provided)
VIDEO OUT
AUDIO OUT
Camcorder
VIDEO
input
Player
AUDIO input
To rear panel
PAUSE connector
Mini-plug
cable
(not provided)
(JVC camcorder
only)
EDIT
HRJ780EU2.fm Page 32 Thursday, November 30, 2000 1:34 PM