Masterpage:Right
EN 5
FRONT DISPLAY PANELA“Timer” Indicator 墌pg.25, 27, 28
BPlay Indicator
CRecord Indicator
DChannel/Clock Display 墌pg. 11
To switch display, press – –:– –. Channel position is not
displayed during playback.
Mode Display (L-1, L-2, F-1 or SAt*)
* When “L-2 SELECT” is set to “SAT” (墌pg.43), “SAt” appears
instead of “L-2”.
EInstant REVIEW Indicator 墌pg. 18
FVCR Indicator 墌pg. 21
Start Time Indicator 墌pg.28
GSAT# Indicator 墌pg. 31
Stop Time Indicator 墌pg. 28
ON-SCREEN DISPLAYWhen “O.S.D.” is set to “ON” (墌pg.41), various
operational indicators appear on the TV screen.
AOperation mode indicators
BTape speed SP/LP/EP
* EP is for NTSC playback only.
CTape direction
DCounter display 墌pg. 22
ETape remaining time indicator 墌pg.22
FAudio mode display 墌pg. 19
GTape position indicator
The tape position indicator
appears on the TV screen
when you press 3 or
5from the Stop mode
or perform an Index Search
(墌pg. 19). The position of
“q” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape used, the tape position
indicator may not appear correctly.
HType of broadcast 墌pg. 22
IVPS/PDC Indicator 墌pg. 25, 27
JCurrent day/month/year
KClock display
LChannel position number and station name/
Auxiliary input indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (墌pg.43), “SAT” appears
instead of “L-2”.
MTimer warning display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time.The warning blinks for the entire 5 minutes
leading up to the start of timer recording. To clear the display,
press &.
NCassette loaded mark
Beginning End
HRJ780EU1.fm Page 5 Friday, December 22, 2000 2:44 PM