Masterpage:Left
48 EN SUBSIDIARY SETTINGS (cont.)
Manual Channel Set
Store channels that were not stored during Auto Set Up
(墌pg. 8), Preset Download (墌pg. 10) or Auto Channel Set
(墌pg. 46).
AAccess the Main Menu screen.
Press MENU.
BAccess the Confirmation screen.
Press rt to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or e. The
Confirmation screen appears.
CSelect the channel position.
Press rt w e until an open
position in which you want to
store a channel begins blinking,
then press OK. The Manual
Channel Set screen appears.
DSelect the band.
EInput the channel.
Press the NUMBER keys to input the channel number you
want to store.
●Input “0” before any single number entries.
●To input the registered station name (ID – 墌pg.51), press e
until “– – – –” (ID setting) begins blinking, then press rt.
●For fine tuning adjustment, press e until “+/–” begins blinking,
then press rt. While tuning, “+” or “–” appears.
●When storing a channel that sends scrambled broadcasts,
press e until “OFF” (Decoder setting) blinks, then press rt
to set “DECODER” to “ON” (“OFF” is the default setting).
●When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”
setting cannot be changed (墌pg. 43).
FEnter new channel information.
Press OK and the Confirmation screen appears.
●Repeat steps 3 – 6 as necessary.
GClose the Confirmation screen.
Press MENU.
●To change positions, see “Change Station Channel Position”
(墌pg. 49).
●If you wish to set station names other than the ones registered
in your recorder, see “Set Stations (B)” (墌pg.50).
The blueback screen and the
programme currently being
broadcast by the selected
channel appear alternately for
8 seconds each.
(E
xamp
l
e
)
T
o store
i
n pos
i
t
i
on
12.
Press rt to change the band
between CH (regular) and CC
(cable), then press e.
ATTE NT IO N
Guide Program numbers are not set when channels are
stored manually. If an attempt is made at timer programming
with the SHOWVIEW system in this state, the “GUIDE PROG
SET” screen appears; set the Guide Program numbers on this
screen. (墌pg. 25, “ATTENTION — Guide Program Number
Set“)
Or perform “Guide Program Number Set” (墌pg. 39).
HRJ780EU3.fm Page 48 Thursday, November 30, 2000 1:34 PM