JVC HR-S5300U manual Select D.S.T. Mode, Select Mode, Make Corrections, Auto, Manual

D.S.T. SELECT

=AUTO

ON

OFF

PRESS (SET+/–) FOR CHOICE PRESS (MENU) TO END

MENU SELECT

+
				0	00
	0	0	0	00	00
					0
					0
					0
	00				0
	00				000
	00				0
–	00				00
	0				0
	0
	00				000
	00				00

SET

9

11

SELECT D.S.T. MODE

You have three choices: a–Select “AUTO” and the adjustment to your VCR’s clock will be made according to the incoming signal from the host channel.

b–Select “ON” and the adjustment will be made based on the clock itself.

c–Select “OFF” if Daylight Saving Time doesn’t apply to you.

Place the arrow next to your choice by pressing SET +/–, then press MENU and the Semi-Auto Clock Set screen reappears.

	1	2	3
DIGIT	4	5	6
	7	8	9
		0	SELECT

MENU

SET

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

Auto

SELECT MODE

5 At the Override Auto Clock Set screen, place the arrow next to "AUTO CLOCK SET" by pressing SET +/–, then power off the VCR. Do not power it on again until the clock has been adjusted. The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The clock will be adjusted on the hour based on the time displayed on the VCR, not on the actual real time.)

IMPORTANT

After setting the Semi-Auto clock set, make sure that the VCR is off before the next hour so that the clock can be adjusted. (The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM.)

Manual

5	SELECT MODE
	At the Override Auto Clock Set screen (☞ pg. 10), place
	the arrow next to “MANUAL CLOCK SET” by pressing
	SET +/–, then press SELECT.

SET DATE, TIME AND D.S.T.
The Manual Clock Set	MANUAL CLOCK SET
screen is displayed and the
6 first setting that can be set	DATE	1/ 1/96 MON
	TIME	– – : – – AM
begins blinking.	D.S.T.	ON
Press SET +/– to set the
month, then press SELECT.
The day display begins	PRESS (SELECT, SET+/–)
blinking. Repeat the
	PRESS (MENU) TO END
procedure to set the day,
year, hour (including AM/PM), minutes and D.S.T.
(Daylight Saving Time).
● As for the D.S.T. setting

a–Set to "ON" and the adjustment will be made based on VCR's clock.

b–Set to "OFF" if D.S.T. doesn't apply to you.

When you’re finished with this set-up procedure, press MENU to start the clock.

MAKE CORRECTIONS

7 To change any of the settings, press SELECT until the item you want to change blinks, then set as in step 6.