JVC HR-S5300U manual Edit From a Camcorder

44

Edit From A

Camcorder

Recorder Your VCR

+
					0	000
		0	0	0	0	0
	0					0
	0					0
	00					00
	000					0
	00					00
–	0					0
	0					0
	0
	0					0
	0					00
	00					00

EDITING

You can use a camcorder as the player and your VCR as the recorder.

1	MAKE CONNECTIONS
	Connect an AV cable between the camcorder’s VIDEO
	OUT and AUDIO OUT connectors and your VCR’s
	VIDEO IN and AUDIO IN connectors.
	● When a Master Edit Control-equipped JVC camcorder is
	used, the camcorder is capable of controlling your VCR.
	The mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.
	● If connecting to a camcorder with a monaural output,
	connect the audio output connector on the
	camcorder to the AUDIO IN L of the VCR.
	LOAD A CASSETTE
	Insert the cassette to be recorded on into the recorder.

AUDIO

IN

VIDEO

IN

Camcorder

Player

1

4

7

DIGIT "0"

To rear panel PAUSE/SPECIAL FUNCTION connector

Mini-plug cable (JVC camcorder only)

VIDEO

OUT

AUDIO OUT

EDIT

2	3
5	6
8	SELECT
	9
0

MENU

2
	SET RECORDER’S INPUT
3	MODE
	Press DIGIT key “0” to set to AUX.
	ACCESS MAIN MENU
4	SCREEN
	Press MENU as many times as necessary.
	ACCESS FUNCTION SET
5	SCREEN
	Press SET +/– to place the arrow next to “FUNCTION
	SET”, then press SELECT.
	If you’re using a JVC Master Edit Control-equipped
	camcorder — step 6
	If not — step 9
	ACCESS SPECIAL
6	FUNCTION SCREEN
	Press SET +/– to place the arrow next to “SPECIAL
	FUNCTION”, then press SELECT.
	SELECT MODE

SET

Press SET +/– to place the	SPECIAL FUNCTION
arrow next to “R.A. EDIT/
7 PAUSE”.	=R.A. EDIT/PAUSE
	AV COMPU-LINK
	PRESS (SET+/–) FOR CHOICE
	PRESS (MENU) TO END