JVC HR-S5300U manual SET Input Mode, Locate END Point, Reset the Counter, Locate Start Point

48

EDITING(cont.)

Insert editing replaces part of the recorded scene with new

material. Both the picture and Hi-Fi audio soundtrack are

Insert Editing replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio

track as well, use the audio dubbing function simultaneously. Use your VCR as the recorder.

Recorder Your VCR Source tape

+				00		0
SHUTTLE						000
	0	0	0	0		0
						0
						0
						0
	00					0
	00000					0000
–	00					00
	0					0
	0
	00					000
	00					00
						Recorded
					JOG	tape

	Before insert editing		Normal audio
			track
After insert editing
		Video/Hi-Fi audio track

Audio signal

Video signal

Another VCR

Player

			C.
1	2	3	RESET
4	5	6
7	8	9
DIGIT "0"	0

1

2

3

4

5

6

MAKE CONNECTIONS

Connect the player's VIDEO OUT and AUDIO OUT connectors to your VCR's VIDEO IN and AUDIO IN on the front panel.

SET INPUT MODE

Press DIGIT key "0". "AU" appears in place of a channel number.

ENGAGE TAPE DUBBING MODE

Follow steps 4, 5, 9–11 from the "Edit From A Camcorder" section (☞ pg. 44)

LOCATE END POINT

Load the recording cassette into your VCR, and play it back to determine the edit-out point (the end of the segment to be replaced) using the JOG/SHUTTLE controls.

●Releasing the JOG/SHUTTLE controls engages the Still mode .

RESET THE COUNTER

Press C.RESET to change the counter display to "0H00M00S".

LOCATE START POINT

Determine the edit-in point (the beginning of the segment to be replaced) using the JOG/SHUTTLE controls.