EN
25
Basic
Recording
2Select recording channel
On the front panel:
Press CH5∞.
On the Remote:
a– Press CH + or –.
or
b– Press the Number keys.
●If you connect the TV and the VCR only using
the RF connection, press TV/VCR on the Remote
so that the VCR mode indicator lights on the front
display panel, to view the program to be recorded.
3Set tape speed
Press SP/EP to set the recording speed.
4Start recording
On the front panel:
Press REC ( ¶ ).
On the Remote:
While holding REC ( ¶ ), press PLAY ( 3 ).
●If “VIDEO CALIBRATION” is set to “ON”
(default setting: 墌 pg. 39), this VCR checks the
tape condition for about seven seconds, then
starts recording. This means that the first seven
seconds of the program will not be recorded. If
this is inconvenient for you, follow the steps
below:
1Press REC ( ¶ ) and PAUSE ( 8 ) to start
Video Calibration.
2Then press PLAY ( 3 ) to start recording
after Video Calibration is complete.
To pause recording
Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).
To stop recording
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
on the front panel.
To rewind the tape (when it is not running)
Press REW ( 1 ) (or turn the SHUTTLE ring on the front
panel to the left).
To fast-forward the tape (when it is not running)
Press FF ( ¡ ) (or turn the SHUTTLE ring on the front
panel to the right).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the
tape is not running.
● You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
1Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before
inserting the cassette.
REC
PAUSE
PLAY
DIGITAL TBC/NR
MENU
OK
(MONO)L—AUDIO—RVIDEO
S-VIDEO
S-VHS ET
STOP/EJECT
POWER
FF
REW
CH
SPEP
VCR
STOP/EJECT
( 7 / 0 )
SHUTTLE ring
2
4
PAUSE ( 8 )
PLAY ( 3 )
POWER
1
123
456
789
0
2
4
1
3
STOP ( 7 )
FF ( ¡ )REW ( 1 )
3
2 –a
4
2 –b
POWER
PAUSE ( 8 )
TV/VCR