JVC HR-S7800U manual Express Timer Programing, 34 EN, Set program stop time, Set program date

34 EN TIMER RECORDING (cont.)

Express Timer Programing

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

REW FF

POWER MENU

PLAY

	DIGITAL TBC/NR
S-VIDEO	VIDEO (MONO)L—AUDIO—R
	S-VHS ET	SP	EP	CH	REC	STOP/EJECT	PAUSE
			VCR
					OK
			1

You can directly program the VCR’s timer to record up to 8 broadcasts, as far as a year in advance. Remember, the clock must be set before you can program the timer ( pg. 8 or 10).

1 Load a cassette

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.

The VCR turns on, and the counter is reset, automatically.

	Access VCR PLUS+ screen
2 Press PROG..
	Access Program screen
3 Press START +/– once.			PROGRAM 1
	(If no program is stored,		START		STOP
	“PROGRAM 1”
			– –:– –AM	=	– –:– –AM
	appears.)		DATE		CH
			– –/– –/– –		– – –	SP
		PRESS (+/–, SP/EP, 8=DAILY
		9=WEEKLY), THEN (0K)
		PRESS (PROG.) TO END
4
	Set program start time

1

4

DAILY

(M-F) 7

POWER

2 3

2

5	6
8	9	WEEKLY

Press START +/–		PROGRAM 1
repeatedly to enter the		START		STOP
time you want
		8:00 AM	=	– –:– –AM
recording to start.		DATE		CH
		– –/– –/– –		– – –	SP
Press and hold START
	PRESS (+/–, SP/EP, 8=DAILY
+/– to increase the	9=WEEKLY), THEN (0K)
time in 30-minute	PRESS (PROG.) TO END
intervals.

0 40

347

5 6

29 18

9

5 Set program stop time

Press STOP +/– repeatedly to enter the time you want recording to stop.

Press and hold STOP +/– to increase the time in 30-minute intervals.

6 Set program date

Press DATE +/–. (The current date is displayed on the screen. The date you enter appears in its place.)

7 Set channel number Press CH +/–.

If you are using a DBS receiver, see “ATTENTION FOR DBS RECEIVER USERS” on next page.

Holding down CH +/– rapidly changes the channel numbers.