JVC HR-VP680U manual Express Timer Programing, 28 EN

28 EN TIMER RECORDING (cont.)

Express Timer Programing

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

	1	2	3
				2
	4	5	6
DAILY	7	8	9	WEEKLY

You can directly program the VCR’s timer to record up to 8 broadcasts, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 8 or 10).

1 Load a cassette

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.

●The VCR turns on, and the counter is reset, automatically.

2Access VCR PLUS+ screen

Press PROG..

3Access Program screen

Press START +/– once.	PROGRAM 1
(If no program is stored,	START		STOP
“PROGRAM 1”
	– –:– –AM	=	– –:– –AM
appears.)	DATE		CH
	– –/– –/– –		– – –	SP

PRESS (+/–, SP/EP, 8=DAILY,

9=WEEKLY), THEN (0K) PRESS (PROG.) TO END

CANCEL

34

5

29

1

0	4	0
		7
		6

8

	Set program start time
4 Press START +/–			PROGRAM 1
	repeatedly to enter the		START		STOP
	time you want
			8:00 AM	=	– –:– –AM
	recording to start.		DATE		CH
			– –/– –/– –		– – –	SP
	● Press and hold START	PRESS (+/–, SP/EP, 8=DAILY,
	+/– to increase the
			9=WEEKLY), THEN (0K)

time in 30-minute	PRESS (PROG.) TO END
intervals.

9

5 Set program stop time

Press STOP +/– repeatedly to enter the time you want recording to stop.

●Press and hold STOP +/– to increase the time in 30-minute intervals.

6 Set program date

Press DATE +/–. (The current date is displayed on the screen. The date you enter appears in its place.)

7Set channel number

Press CH +/–.

●Holding down CH +/– rapidly changes the channel numbers.

●If you receive your programs through a cable box, select the cable box output channel — the channel on which you view the cable box programs on the TV.