JVC HR-VP680U Showing on-screen display, Display VCR status on TV screen, Erase on-screen display

EN 21

D Showing on-screen display

When “SUPERIMPOSE” is set to “ON” (☞ pg. 33), you can see the current VCR status on the TV screen.

●For more detailed information about the on-screen display, see page 46.

1 Display VCR status on TV screen

During recording or	CH	125		RECORD
recording pause, press	THU 12:00 AM				PAUSE
OSD.	STEREO			] SP
	SAP
All indications	B	+	+	+		E
corresponding to the
				INDEX-1
current VCR status are	NORM
			COUNT	–1:23:45
displayed for 5 seconds.	HI–FI

The time counter remains

on the screen indicating the elapsed time.

●The indications are not recorded.

2 Erase on-screen display

Press OSD again.

NOTE:

●If the VCR is in recording pause mode, “RECORD/PAUSE” is always displayed.

●The VCR status can be also displayed during playback.

Other useful functions for recording

You can also use the following functions for recording.

●Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording, or timer recording), the recording will resume automatically when the power is restored to the VCR. (No setting is required for this function.)

●Second Audio Recording (☞ pg. 35)

This VCR’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast.

To record a SAP program received, set “2ND AUDIO RECORD” to “ON” using the menu screen.

Note:

When the channel is changed on the VCR;

●The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast.

●The “SAP” indication appears on the screen for about 5 seconds if the program is a SAP broadcast.

●Both indications appear when a stereo program is accompanied by SAP sound.