JVC HR-VP70U Unplug Vcrs Power, SET A/B Code Switch, Plug in Power Cord, Turn VCR Power on

POWER

A/B CODE

1 2 3

4 5 6

7 8 9

TIMER

0

EN51

Control Two JVC VCRs

The supplied remote control is capable of controlling two JVC VCRs independently using the A/B CODE switch. You can set this VCR so it responds to remote commands only when the switch is set to B, and another VCR so it responds to commands when the switch is set to A. The switch is preset to A because this VCR normally responds to A-code signals. Follow steps 1 – 4 to set this VCR to respond to B-code commands.

	UNPLUG VCR'S POWER
1	CORD
	Unplug from the AC outlet.
2	SET A/B CODE SWITCH
	Set the A/B CODE switch on the remote control to B.
3	PLUG IN POWER CORD
	Plug back in to the AC outlet.
4	TURN VCR POWER ON
	Press POWER on the remote.

The VCR will now respond only to B-code commands.

To set the VCR back to respond to A code signals, repeat the same procedure as shown above except setting the A/B CODE switch to A instead of B in step 2.

You can control two VCRs with the same remote control by switching the remote's code between A and B.