JVC HR-VP70U manual VCR Plus+ Timer Programming, EN Timer Recording

PRESS (8=DAILY, 9=WEEKLY SP/EP=REC SPEED)

PRESS (MENU) TO END

38ENTIMERRECORDING

VCR Plus+

Timer

Programming

●Before VCR Plus+ Timer programming, see "VCR Plus+ Setup" on page 18.

●Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

2 2

q 5/8 6

1	2	3	NUMBER
4	5	6
7	8	9	NUMBER "9"

CANCEL	0
SP/EP

OK

MENU

Timer recording allows you to program the VCR to automatically record a program which will be broadcast at some future time.

The timer record function can be programmed using VCR Plus+ or On-Screen Timer Programming. (☞ pg. 38 or 40)

1	LOAD A CASSETTE
	Make sure the record safety tab is present.
	● The VCR’s power comes on automatically.
2	ACCESS VCR PLUS+ SCREEN
	Press MENU on the remote		VCR PLUS+
	control.
	● The clock must be set in
	order to access the VCR
	Plus+ screen. If you
	haven’t set the clock, the
	Main Menu screen
		PRESS NUMBER KEY (0-9)
	appears when you press	PRESS (MENU) TO MAIN MENU
	MENU. Refer to page 7
	for the Plug & Play procedure or page 9 for the clock
	setting procedure.
	ENTER PLUSCODE NUMBER
	Press the appropriate NUMBER keys to enter the
	PlusCode number printed in the TV listings for the TV
3 program you wish to record.
	● To make corrections, press CANCEL and input the
	correct PlusCode number.
	● If the PlusCode number you input is incorrect,
	"ERROR" may appear on the screen to advise you of
	the error. This happens when the PlusCode number is
	for a program which has already passed. "ERROR" is
	displayed for about 4 seconds and the VCR Plus+
	screen reappears (step 2).

CHECK INPUT DATA

Press OK and the Program		PROGRAM 1
screen appears.
		(VCR PLUS+ 12345678)
The PlusCode number you
	DATE		12/24 WED
4 entered appears in the	START		12:00 PM
Program screen. Check to	STOP		1:00 PM
make sure it’s accurate.	CHANNEL		40 SP

● To timer-record daily or weekly serials, press DAILY (NUMBER “8”) or

WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY” appears on the Program screen. Pressing the button again makes each corresponding display disappear.

●If you made a mistake, press CANCEL and, after pressing MENU as many times as necessary to access the VCR Plus+ screen, input the correct PlusCode number.

SET TAPE SPEED

5 Press SP/EP.