Amana ZRRC8000, ZRTC8500 owner manual Interrupt Self-Cleaning Cycle, Delayed Self-Cleaning

Self-Cleaning

CAUTION

To avoid fire or smoke damage, remove any flammable materials from storage drawer. Items like plastic containers and paper manuals can melt or burn.

•A small amount of smoke is normal when cleaning. Excessive smoke may indicate too much food residue has been left in oven or a faulty gasket.

•Oven should be cleaned before it gets too dirty. Wipe up large spills before self-cleaning.

•Do not use self-cleaning cycle if oven light cover is not properly in place.

•Oven light will not work during clean cycle.

1.Remove oven racks and all cooking utensils from oven. Clean excess spills from oven interior.

2.Press CLEAN pad.

3.Press + or - until desired cleaning time is displayed. Clean can be set from 2 to 4 hours. Recommended clean time is 3 hours.

•Oven will begin to clean automatically. “CLEAN”, “LOCK”, and “ON” will light in display. As oven door locks and unlocks “LOCK” will flash in display. When door is locked, “LOCK” will remain in display. When cleaning cycle has elapsed, oven will automatically turn off. End-of-cycle signal will not sound.

CAUTION

To avoid risk of personal injury do not touch oven vents or areas around vents during self-cleaning. These areas can become hot enough to cause burns.

To avoid risk of damage to automatic locking system, do not try to force oven door open when “LOCK” is flashing in display. When oven has cooled to a safe temperature, “LOCK” will disappear from display and door can be opened. “LOCK” will flash in display while unlocking.

Interrupt Self-Cleaning Cycle

1.Press OVEN CANCEL pad.

2.When oven has cooled to a safe temperature, lock will disappear from display and door can be opened.

Delayed Self-Cleaning

1.Remove oven racks and all cooking utensils from oven. Clean excess spills from oven interior.

2.Press CLEAN pad.

3.Press + or - until desired cleaning time is displayed.

4.Press STOP TIME pad.

5.Press + or - until desired stopping time is displayed. A starting time will automatically be calculated based on amount of cleaning time and stop time.

•“DELAY”, “CLEAN”, and “LOCK” will light in display. As oven door locks and unlocks “LOCK” will flash in display. Oven will begin to clean at preset time and “ON” will light in display. When cycle is complete oven will automatically turn off.

Canceling Self-Clean Cycle

1.Press OVEN CANCEL pad.

2.When oven has cooled to a safe temperature, “LOCK” will disappear from display and door can be opened.

14