EN 3

IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this product and keep this booklet for future reference.

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating- current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

•Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

•Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

ANTENNA INSTALLATION

INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN WIRE

GROUND CLAMP

receptacles, and the point where they exit from the product.

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

Page 2 Page 4
Page 3
Image 3
JVC HR-VP783U Grounding or Polarization, Power Sources, Ventilation, Wall or Ceiling Mounting, Outdoor Antenna Grounding
Page 2 Page 4

HR-VP783U specifications

The JVC HR-VP783U is a remarkable VCR that encapsulates the best of video recording technology from its era. Known for its reliability and advanced features, this model was a favorite for both casual viewers and avid videophiles. Designed for versatility, the HR-VP783U supports multiple formats, allowing users to play both VHS and S-VHS tapes. This capability is essential for those who wish to enjoy a vast library of content or transfer old home videos.

One of the standout features of the HR-VP783U is its Super VHS (S-VHS) compatibility. S-VHS provides increased resolution and improved image quality compared to standard VHS, making it an excellent choice for recording and playing back high-quality video. Additionally, the VCR supports S-VHS ET, which allows users to play standard VHS tapes while still benefiting from enhanced quality in S-VHS format.

The HR-VP783U is equipped with JVC's advanced picture enhancement technologies. One notable feature is the Time Base Corrector (TBC), which helps eliminate signal irregularities, resulting in smoother and clearer picture playback. This is especially beneficial for old tapes with signs of wear and tear.

In terms of convenience, the VCR boasts a programmable timer that allows users to schedule recordings effortlessly. The easy programmable timer makes it simple to record your favorite shows while you're out, ensuring you never miss an episode. The unit also features a comprehensive remote control that provides straightforward navigation of its various functions and settings.

Connectivity is another strong point of the JVC HR-VP783U. It offers multiple input and output options, including composite video, S-Video, and audio jacks, ensuring compatibility with a range of devices. This enhanced connectivity allows users to connect to televisions, cameras, and even editing equipment with ease.

Furthermore, the HR-VP783U is designed with user-friendliness in mind, featuring an intuitive on-screen display and straightforward controls that appeal to users of all ages. With its robust build and reliable performance, the JVC HR-VP783U has earned a reputation for durability, making it a dependable choice for anyone seeking a comprehensive VCR solution. Whether for home use or professional applications, the JVC HR-VP783U remains a noteworthy model in the world of video recording.
Top Page Image Contents