Connecting an Antenna or Cable TV
aAntenna:
Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your anten- na cable is flat connect it to a
bCable TV:
If your cable connection has no converter or descrambler, unscrew the cable from your TV and attach it to the ANT.IN jack on the DVD+VCR. If a converter is required connect a coaxial cable from the wall jack to the IN connector on the converter, and a coaxial cable from the OUT connector on the converter to the ANT IN on your DVD+VCR. This cable hookup permits both TV and DVD+VCR operation.
Antenna Antenna
To view or record a CATV channel when using cable box
1.Tune the TV to the DVD+VCR output channel (CH 3 or 4).
2.Set the DVD+VCR channel selector to the cable output channel. (Example: CH3)
3.Select a channel using the cable converter.
Notes:
•With this connection, you cannot record one pro- gram while viewing another.
•If you are using a cable box to tune channels, it is not necessary to do Auto Channel Set.
Basic TV Connections
Make one of the following connections, depending on the capabilities of your TV.
Rear of TV
ANTENNA | VIDEO | AUDIO INPUT | |
INPUT | INPUT |
|
|
|
| L | R |
Preparation
OR | OR | V A1 |
| R |
Rear of DVD+VCR
Rear of DVD+VCR
CA2
Pr | Pb | Y | R | L |
COMPONENT/PROGRESSIVE SCAN | AUDIO INPUT | |||
| VIDEO INPUT |
| ||
Rear of TV
11
