![](/images/new-backgrounds/1310760/31076077x1.webp)
Playback procedure
Preparation:
•Turn ON the TV and set it to the video input mode.
•Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press DVD to select the DVD mode. (The DVD indicator will light.)
1 Press OPEN/CLOSE.
The disc tray will open.
2 Place a disc onto the tray.
Hold the disc, position it with the printed label side up, align it with the guides, and place it in its proper position.
3 Press OPEN/CLOSE or PLAY. The disc tray closes automati- cally.
On the screen, changes to “Reading” and then playback will commence.
• A menu screen may appear on the TV screen, if the disc has a menu feature. In this case,
Reading
press ,
,
,
or ENTER to operate a menu feature.
4 Press STOP to end playback.
• The DVD/VCR memorizes the stopped point, depending on the disc. “” appears on the screen for approx. 4 seconds. “
” keep blinking in the display until the playback is stopped completely. Press PLAY to resume playback (from the scene point).
•If you press STOP again (“ ” appears on the screen) or unload the disc, the DVD/VCR will clear the stopped point.
5 Then press OPEN/CLOSE. The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and DVD/VCR turns off.
NOTES:
• If a
• Some discs may take a minute or so to start playback.
• A “Prohibition” symbol may appear at the upper left of the screen. This symbol means either the feature you tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate a problem with the DVD/VCR.
• When you set a
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.
• When playing
outputs of the DVD/VCR are connected to an amplification system.
39