JVC HR-XVC20U manual Marking desired scenes, Marking the scenes, Returning to the scenes

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene.

NOTES:

•Some discs may not work with the marking operation.

•The marking is canceled when you open the disc tray or turn the power off.

•Some subtitles recorded around the marker may fail to appear.

Preparation:

•Turn ON the TV and set it to the video input mode.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press DVD to select the DVD mode. (The DVD indicator will light.)

Marking the scenes

	Marker32
1 Press MARKER during	/Enter/Cancel/Marker
	1
playback.
2 / .	1	002754
Then press ENTER at the desired	Marker3/Enter/Cance2	l/Marker
Select the blank Marker using

scene.

•Repeat this procedure to set the other 2 scenes.

3 Press MARKER to remove this display.

Returning to the scenes

1 or stop mode.	21	1	1627	2554
				31
Press MARKER during playback	Marker3/Enter/Cancel/Marker0208
	2	1	16	25
				31
2 Press / to select the Marker	Marker3/Enter/Cancel/Marker0208
	1		27	54
1-3.

3 Press ENTER.

Playback starts from the marked scene.

To cancel the mark

1 Press MARKER.

2 Press / to select the Marker 1-3.

3 Press CANCEL.

To remove this display, press MARKER.

49