Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)
| TV/CATV Selection | CHUTOSETUPTVCHCATVMMORY | |||
| 2 CATV” option. |
| |||
| 1 Press SET UP MENU. The VCR menu screen will appear. | ||||
|
| Press | or | to select “CH SETUP”, then press ENTER. | |
|
| Press | or | to select the “TV/ | ADD/DELETE |
|
|
|
|
| |
|
| TV | - VHF/UHF channels | ||
|
| Then press ENTER to select the | CHSETUP | ||
| 3 TV or CATV mode. The arrow | UTOTVCHCATVMMORY | |||
|
| indicates the selected mode. | |||
|
| CATV - CABLE TV channels |
| ||
| 4 Press SET UP MENU until the menu screen is cleared. | ||||
| Setting channels automatically | ||||
| The VCR can receive a maximum of 181 channels by | ||||
|
| or | to select “AUTO CH | UTOTVCHCATVMMORY | |
| presetting the channels into memory. | ADD/DELETE | |||
| 1 | Repeat above step 1 and press | CHSETUP | ||
|
| MEMORY”. |
| ||
|
|
|
| ||
NOTE: |
|
|
|
|
|
You can not select "CH SETUP" if you |
|
|
|
|
|
set the channel to "L". | 2 Then press ENTER. |
| |||
| CH 002 | ||||
|
| The auto tuning will start. The |
| ||
channel display will count up and when finished, the screen returns to normal.
21
