JVC HR-XVC41S Connecting an Antenna or Cable TV, Basic TV Connections, a Antenna, b Cable TV

Connecting an Antenna or Cable TV

aAntenna:

Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your antenna cable is flat connect it to a 300-ohm to 75-ohm antenna adap- tor (not supplied) and slip the adaptor over the ANT.IN jack. Don’t attempt to screw it into to the DVD+VCR.

bCable TV:

If your cable connection has no converter or descrambler, unscrew the cable from your TV and attach it to the ANT.IN jack on the DVD+VCR. If a converter is required connect a coaxial cable from the wall jack to the IN connector on the converter, and a coaxial cable from the OUT connector on the convert- er to the ANT.IN on your DVD+VCR. This cable hookup permits both TV and DVD+VCR operation.

a Antenna Antenna

To view or record a CATV channel

1Tune the TV to the DVD+VCR output channel (CH 3 or 4).

2Set the DVD+VCR channel selector to the cable output channel. (Example: CH3)

3Select a channel using the cable converter.

Notes:

•With this connection, you cannot record one pro- gram while viewing another.

•If you are using a cable box to tune channels, it is not necessary to do Auto Channel Set.

Basic TV Connections

Make one of the following connections, depending on the capabilities of your TV.

Rear of TV

ANTENNA	VIDEO	AUDIO INPUT
INPUT	INPUT
		L	R

R V A1

OR OR

Rear of DVD+VCR

C A2 S

b Rear of DVD+VCR

Pr	Pb	Y	R	L
COMPONENT/PROGRESSIVE SCAN			AUDIO INPUT		S-VIDEO
	VIDEO INPUT

INPUT

Rear of TV

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R).

10