Remote Control Function
Remote Control A/B/C Code Switching
The remote control is capable of controlling three JVC video units independently. Each of the units can respond to one of three codes (A, B or C). The remote control is preset to send C code signals because your unit is initially set to respond to C code signals. You can easily modify your unit to respond to A or B code signals.
1/ I B
ENTER
x
•Keep pressing ENTER (OK) down during step 1.
1.Press the number Key “1” for A, “2” for B or “3” for C to change the remote control code.
2.Ensure the unit in VCR mode, and then turn off the power.
3.Press B on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel.
4.Press x (STOP) on the remote control to change the unit's code. The code currently set on the remote control blinks on the front display panel for approximately 5 seconds, and is applied to the unit.
Preparation
19
