JVC HR-XVC40B Preparation, Rear Panel, Do not touch the inner pins of the jacks on the rear panel

Rear Panel

Caution

Do not touch the inner pins of the jacks on the rear panel.

Electrostatic discharge may cause permanent damage to the unit.

a b c d e f

g	h	i
a ANT.IN			f AC Power Cord
Connect the VHF/UHF/CATV antenna to this terminal.			Plug into the power source.
b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))			g RF. OUT
Connect the audio/video output of an external source			Connect to a TV with RF coaxial inputs.
(Audio system, TV/Monitor, VCR, Camcorder).			h COAXIAL (DIGITAL AUDIO OUT jack)
c DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
			(DVD OUT)
Connect to a TV with video and audio inputs.			Connect to digital (coaxial) audio equipment.
d COMPONENT/PROGRESSIVE SCAN VIDEO			i S-VIDEO OUT (DVD OUT)
OUT (Y Pb Pr) (DVD OUT)			Connect to a S-Video Input on TV.
Connect to a TV with Y Pb Pr inputs.

eAUDIO OUT (Left/Right) (DVD OUT)

Connect to a TV or other equipment with audio inputs.

Preparation

Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, VCR, stereo system or other devices as nec- essary for additional connection information.

Notes:

•The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off the unit after removing the disc.

•Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.

•Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system.

Introduction

9