JVC HV-32P37SUE, HV-28P37SUE manual „ Downloading the data to VCR

Setting up your TV

•If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.

•If you don’t want to use the ACI function, press the 6buttons to choose ACI SKIP and then press a.

•When the cable TV broadcast reception is poor, the ACI function will not work properly.

•If there is an error in the ACI data itself, the TV channel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function. Alternatively, use the EDIT/MANUAL function to correct the Programme number (PR) setting.

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” denotes that the ACI function is not working properly. Press the 2button to start the ACI function again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3button to start the AUTO PROGRAM function. It does not cause any problem because all the TV channels are registered to the Programme numbers (PR) by the AUTO PROGRAM function.

„Downloading the data to VCR

You can transmit to the latest Programme numbers (PR) data to the VCR with the T-V LINK function.

Caution

•Only when the T-V LINK compatible VCR is connected to the EXT-2 terminal, this operation is enabled.

•Only when the T-V LINK menu is being displayed, this operation is enabled.

T-V LINK

DOWNLOAD TV VCR

OK

EXIT

D0005-EN

1Turn on the VCR

2Press the a button

The data transmission begins.

DOWNLOAD TV VCR

TRANSFER. . . . .

D0037-EN

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu is changed over to another menu: The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next.

If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu: Check the following three items. Then press the 2button to retry data transmission.

•Has the T-V LINK compatible VCR been connected to the EXT-2 terminal?

•Has the VCR power been turned on?

•Does the SCART cable that is connected to the EXT-2 terminal to T- V LINK compatible VCR have all proper connections?

9