JVC HV-32P37SUE, HV-28P37SUE manual „ T-V Link compatible VCR

Additional preparation

„Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR

Connect the equipment to an EXT terminal (but not the EXT-1 terminal).

You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)” on page 36.

„T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly. After you have stored TV channels in the programme numbers (PR) list, set the DECODER (EXT-2) function for the programme number (PR) to ON to unscramble a scrambled TV channel. For details, see “EXT SETTING” on page 36.

„Connecting headphones

Connect the headphones with a stereo mini- jack (3.5 mm diameter) to the headphone socket at the TV rear panel.

•No sound comes out from the TV speakers when the headphones are connected and only one screen is displayed.

„Video or sound signal output from the EXT-2 terminal

You can change over the output of the video/ sound signal from the EXT-2 terminal. This is useful when you want to dub the video/ sound from another device onto the VCR connected to the EXT-2 terminal. For details on how to do this, see “DUBBING” on page 38.

„TV output from the EXT-1 terminal

The video/sound signal of a TV channel you are viewing is always output from the EXT-1 terminal.

•Changing over a programme number (PR) also changes over the TV output from the EXT-1 terminal.

•The video/sound signal from an EXT terminal cannot be output.

•Teletext programmes cannot be output.

„Connecting speakers/amplifier

While referring to the audio equipment connection diagram, connect the audio equipment you desire to the TV.

You can use external front speakers to listen to the TV sound instead of the TV speakers.

Before connecting anything:

•Read the manuals provided with the amplifier and speakers.

•Turn the TV and amplifier off.

•To prevent magnetism from the speakers adversely effecting the TV screen, use magnetic-shielded speakers for the front speakers.

•Note that connecting cables are not supplied.

BackLof the TV	L	R
RAUDIOOUT

1Amplifier

2Front speakers (Magnetic-shielded type)

•The output from the AUDIO OUT terminal is not interrupted by headphone connection to the TV. You cannot cut the sound from the front speaker even if you connect a headphone to the TV.

•Adjust the volume of the external speakers with the amplifier.

40