DANCE: Increases resonance and bass.
HALL: Adds depth and brilliance to the sound.
STADIUM: Adds clarity and spreads the sound, like in an outdoor stadium.
SEA (Sound Effect Amplifier) modesROCK:
POP:
CLASSIC:
User ModesUSER 1/2/3:
OFF:
*Surround elements are added to the SEA elements to create a
3 Adjust the SEA pattern.
1)Turn 4 / ¢ to select the frequency range (LOW1, LOW2, MID, HIGH1, or HIGH2).
2) Press 1 or ¡ to adjust the level
3)Repeat steps 1) and 2) to adjust the level of the other frequency ranges.
4 Press SET/DISPLAY again.
PR | E |
SET |
SET /
DISPLAY
Creating Your Own Sound Mode—User Mode
You can change SEA pattern to suit your preference. The SEA pattern can be adjusted using 5 frequency
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the unit ONLY:
1 Select one of the preset sound modes.
5 Turn 4 / ¢ to select one of the user modes (USER 1, USER 2, or USER 3) in which you want to store your SEA pattern.
6 Press SET/DISPLAY again.
PR | E |
SET |
SET /
DISPLAY
•If you want to add the surround elements in your SEA pattern, select one of the surround modes (DANCE, HALL, or STADIUM) before starting the procedure below. (See “Selecting the Sound Modes” on page 10.)
2 | Press SET/DISPLAY while the | SET / |
DISPLAY |
selected sound mode is still shown on the display.
The SEA pattern you have created are stored into the user mode selected in step 5.
To use your own sound mode
Select USER 1, USER 2, or USER 3 mode when using the sound modes. See “Selecting the Sound Modes” on page 10.
When you unplug the AC power cord or if a power failure occurs
The setting will be erased in a few days. If this happens, set the user modes again.
Turning On or Off the Key-touch Tone
If you do not want the
| On the remote control ONLY: |
Current level appears. | Press BEEP ON/OFF. |
| • Each time you press the button, the |
| tone turns on and off alternately. |
BEEP
ON/OFF