JVC HX-Z3 Playing at Random-Random Play, To check the program contents, To modify the program

Continued

To check the program contents

On the remote control ONLY:

Before playing, you can check the program contents by pressing 4 (1) or ¢ (¡).

•4 (1) : Shows the programed tracks in the reverse order.

•¢ (¡) : Shows them in the programed order.

Playing at Random—Random Play

The tracks of the currently selected disc will be played at random.

•To use Repeat Play (see page 19) for Random Play, press REPEAT after starting Random Play. Only REPEAT 1 and REPEAT ALL can be selected for Random Play.

1 Load a disc.

To modify the program

Before or after playing, you can erase the last programed tracks by pressing CANCEL/DEMO (or press PROGRAM CANCEL on the remote control).

•Each time you press the button, the last programed track is erased from the program.

CANCEL / DEMO

PROGRAM

CANCEL

2 Press the corresponding disc number (CD1, CD2, or CD3) button where a disc is loaded in step 1, then press 7.

CD3

CD2

CD1

To add tracks in the program before playing, simply select

the track numbers you want to add by following step 4 of the programming procedure. If you want to add tracks from another disc, follow steps 3 and 4.

To erase the entire program before or after playing, press and hold 7 until “CD PROGRAM” appears on the display.

•The program you have made will be erased,

–when you exit from Program Play mode,

–when you unplug the AC power cord, or

–when a power failure occurs.

3 Activate the Random Play mode.

On the unit:

CD PLAY

Press CD PLAY MODE repeatedly MODE until “CD RANDOM” appears on

the display.

•Each time you press the button, the play mode changes as follows:

CD PROGRAM CD RANDOM

Canceled

(Continuous Play)

On the remote control:

Press RANDOM so that	RANDOM
“CD RANDOM” appears
on the display.
	1	2	3	4
		5	6	7	8
	9	10	11	12
		RANDOM

• The RANDOM indicator also lights up on the display.

4 Press CD 3¥8. CD

The tracks are randomly played. Random Play ends when all the tracks of the current disc are played once.

To skip the currently playing track, turn 4 / ¢ to the right (or press ¢ (¡) on the remote control).

If you turn 4 / ¢ to the left (or press 4 (1) on the remote control)

You cannot go back to the previous tracks during Random Play.

To stop playing, press 7.

To exit from Random Play mode, press CD PLAY MODE

(or RANDOM on the remote control) repeatedly until the RANDOM indicator goes off after playback stops.

– 18 –