JVC HX-Z3 manual Playing Back Discs, Loading Discs, Playing Back the Entire Discs-Continuous Play

Playing Back Discs

Loading Discs

On the unit ONLY:

1 Press 0 for the disc tray (CD1, CD2, or CD3) you want to load a disc onto.

The unit automatically turns on and the disc tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press the same 0 you have pressed in step 1.

The disc tray closes.

4 Repeat steps 1 to 3 to place other discs.

When loading more than one disc

When you press 0 for the next tray you want to place another disc onto, the first disc tray automatically closes and then the next tray comes out.

Playing Back the Entire Discs—Continuous Play

You can play discs continuously.

•If you start Continuous Play with an MP3 disc, you can select a track you want to start playback with.

7For audio CDs

1	Load discs.
2	Press one of the disc number	CD3
	(CD1, CD2, or CD3) buttons	CD2
	for the disc you want to play.	CD1
	The unit searches for the disc, and
	starts playing with the first track of the
	selected disc.

Track number Elapsed playing time

TRACK

Tracks of the currently playing CD (Track numbers exceeding 16 are not displayed.)

7For MP3 discs

1 Load discs.

2 Press one of the disc number		CD3
(CD1, CD2, or CD3) buttons		CD2
for the disc you want to play.		CD1
The unit searches for the disc (it may
takes time), and the following
information appears on the display.
Total track number	Total playing time

TRACK

Group title of the 1st group*

TITLE

Group number flashes

*If the group title cannot be shown at a time (exceeding 10 characters), the title scrolls.

– 15 –