ENGLISH

Registering a Bluetooth deviceRegistration (Pairing) methods

Use either of the following items in the Bluetooth menu to register and establish the connection with a device.

•Select “BT-PHONE” or “BT-AUDIO” as the source to operate the Bluetooth menu.

OPEN Make the unit ready to establish a new Bluetooth connection.

Connection is established by operating the Bluetooth device.

SEARCH Make the unit ready to establish a new Bluetooth connection.

Connection is established by operating the unit.

Registering using “OPEN”

Preparation: Operate the device to turn on its Bluetooth function.

1Select “BT-PHONE” or “BT-AUDIO.”

2Select “NEW DEVICE.”3Select “OPEN.”

4Enter a PIN (Personal Identification Number) code to the unit.

•You can enter any number you like (1-digit to 16-digit number). [Initial: 0000]

–Some devices have their own PIN code. Enter the specified PIN code to the unit.

1Move to the next (or previous) number position.

2Select a number.

3Repeat steps 1and 2until you finish entering a PIN code.

4Confirm the entry.

“OPEN...” flashes on the display.

5Use the Bluetooth device to search and connect.

On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECTED” appears on the display.

Now connection is established and you can use the device through the unit.

appears when Bluetooth connection is established.

The device remains registered even after you disconnect the device. Use “CONNECT“ (or activate “AUTO CNNCT”) to connect the same device from next time on. (See pages 25 and 47.)

24