| Symptom | Remedy/Cause | |
|
|
| |
| • “CANNOT PLAY” appears on the display. | • Connect a USB device that contains tracks encoded in an | |
playback | • “NO USB” appears on the display. | appropriate format. | |
• The unit cannot detect the USB device. | • Connect the USB device again. | ||
| |||
|
|
| |
device | • Correct characters are not displayed | This unit can only display letters (upper case), numbers, and | |
(e.g. album name). | a limited number of symbols. (See page 44.) | ||
| |||
|
|
| |
USB | • While playing a track, sound is | The tracks have not been properly copied into the USB | |
sometimes interrupted. | device. | ||
| |||
|
| Copy tracks again into the USB device, and try again. | |
|
|
| |
| • Bluetooth device does not detect the | The unit can be connected with one Bluetooth cellular phone | |
| unit. | and one Bluetooth audio device at a time. | |
|
| While connecting a device, this unit cannot be detected from | |
|
| another device. Disconnect currently connected device and | |
|
| search again. | |
|
|
| |
| • The unit does not detect the Bluetooth | • Check the Bluetooth setting of the device. | |
| device. | • Search from the Bluetooth device. After the device detects | |
|
| the unit, select “OPEN” on the unit to connect the device. | |
|
| (See page 24.) | |
|
|
| |
| • The unit does not make pairing with the | • Enter the same PIN code for both the unit and target | |
| Bluetooth device. | device. | |
|
| • Select the device name from “SPECIAL,” then try to | |
*2 |
| connect again. (See page 25.) | |
|
| ||
Bluetooth |
| • Try to pair/connect from the Bluetooth device. | |
|
| ||
| • Echo or noise occurs. | Adjust the microphone unit’s position. | |
|
|
| |
| • Phone sound quality is poor. | • Reduce the distance between the unit and the Bluetooth | |
|
| cellular phone. | |
|
| • Move the car to a place where you can get a better signal | |
|
| reception. | |
|
|
| |
| • The sound is interrupted or skipped | • Reduce the distance between the unit and the Bluetooth | |
| during playback of a Bluetooth audio | audio player. | |
| player. | • Disconnect the device connected for | |
|
| • Turn off, then turn on the unit. | |
|
| • Connect the player again, when the sound is not yet | |
|
| restored. | |
|
|
| |
| • The connected audio player cannot be | Check whether the connected audio player supports AVRCP | |
| controlled. | (Audio/Video Remote Control Profile). | |
|
| (Operations depend on the connected audio player.) | |
|
|
| |
*2 For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter. | |||
|
| Continued on the next page |
ENGLISH
REFERENCES 57