•<AUTO> setting for <DIMMER> may not work correctly on some vehicles, particularly on those having a control dial for dimming.
In this case, change the <DIMMER> setting to any other than <AUTO>.
•If you change the <AMP GAIN> setting from <HIGH POWER> to <LOW POWER> while the volume level is set higher than “VOLUME 30,” the unit automatically changes the volume level to “VOLUME 30.”
•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.
•When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.
•Even if “4:3 PAN SCAN” is selected, the screen size may become “4:3 LETTERBOX” for some discs.
ENGLISH
•If you try to assign titles to more than 30 station frequencies, “NAME FULL” appears. Delete unwanted titles before assignment.
Output signals through the DIGITAL OUT terminalOutput signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 46).
|
|
| Output Signal |
|
|
| |
Playback Disc | STREAM/PCM | DOLBY DIGITAL/ |
|
| PCM ONLY | OFF | |
|
| PCM |
|
| |||
|
|
|
|
|
|
| |
48 kHz, 16 bits stereo Linear PCM * |
| ||||||
| Linear PCM |
| |||||
|
|
|
|
|
|
| |
| 96 kHz, Linear PCM | 48 kHz, 16 bits stereo Linear PCM |
|
| |||
| Dolby Digital | Dolby Digital bitstream |
| 48 kHz, 16 bits |
| ||
|
|
| stereo Linear PCM |
| |||
|
|
|
|
|
| ||
| MPEG Audio | MPEG bitstream | 48 kHz, 16 bits stereo Linear PCM | OFF | |||
Audio CD, Video CD | 44.1 kHz, 16 bits stereo Linear PCM / |
| |||||
|
| 48 kHz, 16 bits stereo Linear PCM |
|
| |||
MPEG | 44.1/48 kHz, 16 bits Linear PCM |
|
| ||||
MP3/WMA | 32/44.1/48 kHz, 16 bits Linear PCM |
| |||||
WAV | 44.1 kHz, 16 bits stereo Linear PCM |
|
*Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs are not
Continued on the next page
REFERENCES 51