On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECTED” appears on the display.
Now connection is established and you can use the device through the unit.
The device remains registered even after you disconnect the device. Use “CONNECT“ (or activate “AUTO CNNCT”) to connect the same device from next time on. (See the following and page 27.)
Connecting a device1Select “BT PHONE” or “BT AUDIO.”
2Select “NEW DEVICE.”
3To search for available devices: Select “SEARCH.”
The unit searches and displays the list of the available devices. If no available device is detected, “UNFOUND” appears.
To connect a special device: Select “SPECIAL.”
The unit displays the list of the preset devices.
1 Enter the specific PIN code of the device to the
unit.
Refer to the instructions supplied with the device to check the PIN code.
2Use the Bluetooth device to connect.
Now connection is established and you can use the device through the unit.
For special device...Use “OPEN” or “SEARCH” to connect.
Connecting/disconnecting/deleting a registered device
1Select “BT PHONE” or “BT AUDIO.”
2Select a registered device you want to connect/disconnect/delete.
3To connect/disconnect the selected device: Select “CONNECT” or “DISCONNECT.”
To delete the selected device: Select “DELETE,” then “YES.”
ENGLISH
4Select a device you want to connect.
You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “AUTO CNNCT” on page 27.)
EXTERNAL DEVICES 15