JVC KD-AHD59, KD-HDR50 ON:, ON:, USER, OFF:, OFF:, LOW:, MID:, COLOR, HIGH:, FADER*8, FADER R12, BALANCE*9, Menu items, MENU COLOR, VOL ADJUST, SUB.W FREQ, BALANCE L12, VOL ADJ –10

	Category	Menu items	Selectable settings, [reference page]
ENGLISH	COLOR	COLOR 01	Select one of the preset or user color for display and button (except EQ/
		— COLOR 29,	/0) illumination.		illumination during menu, list search and playback mode
	MENU COLOR
		USER	(See also page 32 for USER color setting.)
		MENU COLOR	•	OFF:	Cancels.
		Menu color	•	ON:	Changes the display and button (except EQ/	/0)
					operations.
		RING COLOR*7	•	OFF:	Cancels.
	COLOR	Ring color	•	ON:	When a call comes in, the display will flash in blue.
					• The display will change to the original color when you
	RING				answer the call or the incoming call stops.
					When the unit receive a text message, the display only
					illuminate in blue.
		FADER*8	FADER R12		Adjust the front and rear speaker output balance.
		Fader	— FADER F12:		[Initial: 00]
		BALANCE*9	BALANCE L12		Adjust the left and right speaker output balance.
		Balance	— BALANCE R12:		[Initial: 00]
		VOL ADJUST	VOL ADJ –10		Preset the volume adjustment level of each source (except
		Volume adjust	— VOL ADJ +10:		FM), compared to the FM volume level. The volume level
	AUDIO		[Initial: VOL ADJ 00]		will automatically increase or decrease when you change
					the source.
					• Before making an adjustment, select the source you want
					to adjust.
					• “VOL ADJ FIX” appears on the display if “FM”, “BT PHONE“,
					or “BT AUDIO“ is selected as the source.
		SUB.W FREQ	•	LOW:	Frequencies lower than 72 Hz are sent to the subwoofer.
		Subwoofer cutoff	•	MID:	Frequencies lower than 111 Hz are sent to the subwoofer.
		frequency	•	HIGH:	Frequencies lower than 157 Hz are sent to the subwoofer.

*7 Displayed only when Bluetooth adapter, KS-BTA200 is connected. *8 If you are using a two-speaker system, set the fader level to “00.” *9 This adjustment will not affect the subwoofer output.

30