When receiving HD Radio multicastchannels...HD1
Channel number
Select your desired channel.[Turn] = [Press]
Reception improves, but stereo effect will be lost.
• The ST indicator goes off.
To restore the stereo effect, repeat the same procedure to select “MONO OFF.”
ENGLISH
•“LINKING” appears while linking to a multicast channel.
Searching for HD Radio stations only[Hold] 
HD 
When a station is tuned in, searching stops.
Improving the FM receptionWhen an FM stereo broadcast is hard to receive, activate monaural mode for better reception.
• See also page 29.
1Call up the menu.[Hold]
2Select “TUNER.”[Turn] = [Press]
3Select “MONO.”[Turn] = [Press]
Changing HD Radio reception modeWhile receiving an HD Radio broadcast, the unit receives digital or analog audio automatically due to the receiving condition.
While listening to an HD Radio station...• See also page 29.
[Hold]
The menu is called up.
[Turn] = [Press]
• Repeat this procedure.
Select “TUNER” = “BLEND HOLD”
=“AUTO/DIGITAL/ANALOG”
Lights up when holding the digital reception.
Flashes when holding the analog reception.
•If no sound can be heard with “AUTO,” change the setting to “ANALOG” or “DIGITAL.”
•The setting automatically returns to “AUTO” in the following cases:
–When you tune in to another broadcast.
–When you change to another source.
–When you turn off the power.
•This setting cannot take effect for the conventional FM/AM stations.
•If the radio station forces the reception mode to digital, the HOLD indicator flashes.
OPERATIONS 9