ENGLISH

You can enjoy iTunes Tagging with the following types of iPod/iPhone:

iPod classic, software version 1.0 or later

iPod nano (3rd Generation), software version 1.0 or later

iPod nano (4th Generation), software version 1.0 or later

iPod Touch, software version 2.1 or later

iPhone/iPhone 3G, software version 2.1 or later

If the iPod/iPhone does not play correctly, please update your iPod/iPhone software to the latest version. For details about updating your iPod/iPhone, visit <http://www.apple.com>.

When you turn on this unit, the iPod/iPhone is charged through this unit.

The text information may not be displayed correctly.

If the text information contains more than 11 characters, it scrolls on the display.

This unit can display up to 40 characters for “IPOD” and up to 33 characters for “USB-IPOD.”

Warning messages for iTunes Tagging

MEMORY FULL

You are trying to store the 61st PSD. Transfer the tagged PSDs to the iPod/iPhone, or clear all tagged PSDs. (See page 11.)

TAG ALREADY SAVED

You are trying to tag the song for the 2nd time while receiving one song.

NO TAG DATA

The broadcast currently received does not support the iTunes Tagging or the broadcast does not provide PSD.

CAN’T TRANS IPOD FULL

The memory of the iPod/iPhone is full.

UNSUPPORTED DEVICE FOR TAGGING

The connected iPod/iPhone is not compatible with iTunes Tagging.

TRANS ERROR

The iPod/iPhone is disconnected during data transfer.

TRANS OFF

Data transfer is canceled.

Notice:

When operating an iPod/iPhone, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only)

Menu operations

If you change the “AMP GAIN” setting from “HIGH POWER” to “LOW POWER” while the volume level is set higher than “VOLUME 30,” the unit automatically changes the volume level to “VOLUME 30.”

JVC bears no responsibility for any loss of data in an iPod/iPhone and/or USB mass storage class device while using this System.

36