JVC KD-AR400 To select the scroll mode-SCROLL, Extin, To turn the tag display on or off-TAGDISP

ENGLISH

To select the scroll mode—SCROLL

You can select the scroll mode for the disc information (when the entire text cannot be shown at once).

When shipped from the factory, scroll mode is set to “ONCE.”

•	ONCE:	Scrolls only once.
•	AUTO:	Repeats the scroll (5-second
		intervals in between).
• OFF:		Cancels scroll mode.

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP (display) for more than one second.

To select the external component to use

—EXT IN

You can connect the external component to the CD changer jack on the rear using an adapter specially designed for the external component. To use the external component as the playback source through this unit, you need to select which component—CD changer or external component—to use.

When shipped from the factory, CD changer is selected as the external component.

• CHANGER: To use the CD changer.

•	LINE IN:	To use the external component
		other than CD changer.
•	SIRIUS:	To use the JVC SIRIUS Radio.

Notes:

•For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

•For connecting the JVC SIRIUS Radio, refer to the SIRIUS Radio Setup Manual (separate volume).

To turn the tag display on or off—TAG DISP

An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version

1)and ID3v2 (ID3 Tag version 2). If both ID3v1 and ID3v2 are recorded on a disc, ID3v2 information will be shown.

When shipped from the factory, “TAG ON” is selected.

•TAG ON: Turns on the ID3 tag display while playing MP3 files.

•If an MP3 file does not have ID3 tags, folder name and file name appear.

•TAG OFF: Turns off the ID3 tag display while playing MP3 files. (Only the folder name and file name can be shown.)

To select the amplifier gain control

—AMP GAIN

You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select “LOW PWR” to prevent them from being damaged.

When shipped from the factory, “HIGH PWR” is selected.

•LOW PWR: You can adjust the volume level from “VOL 00” to “VOL 30.”

Note:

If you change the setting from “HIGH PWR” to “LOW PWR” while listening at a volume level more than 30, the unit automatically changes the volume level to “VOL 30.”

•HIGH PWR: You can adjust the volume level from “VOL 00” to “VOL 50.”

26