BASIC OPERATIONS
1 3 2
Turning on the power | Volume level appears. | |||
| ||||
|
|
|
| |
|
|
|
| |
1 Turn on the power. |
|
|
| |
|
|
| ||
| Volume level indicator | |||
| Note on | 4 Adjust the sound as you want. (See | |||
| When you select a source in step 2 below, the | ||||
pages 22 and 23.) | ||||
power automatically comes on. You do not have | ||||
|
|
| ||
| to press this button to turn on the power. |
|
|
| |
ENGLISH
2Select the source.
To operate the tuner (FM or AM), see pages 10 – 12.
To play a CD,
see pages 13 – 16. To play an MP3 disc,
see pages 18 – 21.
To operate the CD changer, see pages 28 – 31.
To operate the external component (LINE IN or SIRIUS), see page 32.
3Adjust the volume.
To increase the volume
To decrease the volume
To drop the volume in a moment
Press 
briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial, you can also restore the sound.
To turn off the power
Press and hold 
for more than one second.
“SEE YOU” appears, then the unit turns off.
•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
CAUTION on Volume Setting:Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.
7
